ALU Comfort
THE BEGINNERS FOR STANDARD REQUIREMENTS IN DOOR CONSTRUCTION
ALU Comfort – a good standard. The aluminum vapor barrier integrated in the two cover layers, in combination with the rod inserts, ensures good stability of the door leaf. Manufactured in top quality with stick inserts with standing annual rings, laminated and finger-jointed frame friezes made of high-quality wood and with weatherproof cover layers.
ALU Comfort can be used universally and can be processed easily and cost-effectively thanks to its high-quality components and low weight. It ensures you an excellent price-performance ratio, attractive returns and the highest level of customer satisfaction. All components are sufficiently thermally separated and prevent thermal bridges. ALU Comfort guarantees a high level of stability and achieves very good values in all performance classes according to EN 14351-1. Use this for your CE marking and win in daily competition.
QUALITY FEATURES:
The 5-layer veneer board
A 5-layer, AW-glued veneer plywood panel made from carefully selected woods.
Advantages:
-
The decorative veneer layer consists of high-quality, sliced – or Fineline veneers, which are joint-glued together as shown. Our recommendation is to shorten the blank at both ends.
-
The Moralt external door blank achieves a visual veneer structure on both sides, which corresponds to a door of very high quality.
Burglary resistance
Better safe than sorry: Our blanks offer all the prerequisites for producing burglary-resistant front doors: resistance class RC3/ RC2 according to DIN EN 1627: 1999-04 on the surface of the blank.
Flat steel stabilizer
A flat steel stabilizer consisting of two flat pieces of steel grooved into the wood and glued over the entire surface. This works according to the static principle of tension and compression.
Advantages compared to a U-shaped steel and square profiles:
-
No thermal bridge due to thermal separation of the two pieces of steel .
-
Free of cavities, so no condensation forms inside.
-
The flat steel stabilizers do not show on the surface even when the building moisture is high.
-
Low weight by avoiding unnecessary steel joints.
Frame
Unmistakable handcrafted charm: Our stiles and rails are made of solid, carefully selected - or laminated, finger-jointed timber.
PUR rigid foam
Highly recommended: The inner core is made of polyurethane.
Advantages:
-
Low weight, excellent thermal insulation.
-
Foam can withstand extreme temperatures: short-term up to 250 °C, long-term up to 110 °C.
-
Compressive strength is sufficient to place insulating glass on it in the vision panel.
-
Thanks to production under controlled conditions, the polyurethane quality is continuously at a high level.
LVL core middle layer
The LVL core with upright-standing annual rings, consisting of approx. 5 mm wide peeled veneers glued together. The optimum strength is attained through offset joints within the inner core layer.
Advantages:
-
Highest strength values from the offset laminated joints.
-
Optimum surface smoothness thanks to the even distribution of the individual veneers and the consistent position of the annual rings.
Local wood species
The LVL core with upright-standing annual rings, consisting of approx. 5 mm wide peeled veneers glued together. The optimum strength is attained through offset joints within the inner core layer.
Advantages:
-
Highest strength values from the offset laminated joints.
-
Optimum surface smoothness thanks to the even distribution of the individual veneers and the consistent position of the annual rings.
Telefon
Telefax
Adresse
Moralt AG, Obere Tiefenbachstraße 1, D-83734 Hausham